Back to Products
Contact Us
Optical Switch1310/1550nm500 mW
Optical Switch
1x2 / 2x2 optical switches for optical path switching and redundancy protection, featuring low insertion loss and high channel isolation at 1310 nm and 1550 nm, with customizable pigtails and connectors.
1×2 Optical Switch
Port Settings1×2
Wavelength1310/1550 nm
Insertion Loss≤0.8 dB
Crosstalk≥55 dB
Switch Time≤10 ms
Repeatability≤0.02 dB
Durability≥10^7 times
Maximum Optical Power500 mW
Fiber TypeSingle-mode / PM optional
Operating Temperature-5~+70 ℃
Connector TypeFC/UPC, FC/APC, LC/UPC
Available Configurations
Key Features
- Low insertion loss, typically ≤ 0.8 dB
- Channel isolation ≥ 55 dB
- Switching time ≤ 10 ms
- Repeatability ≤ 0.02 dB
- Durability ≥ 10^7 cycles
- Available at 1310 nm and 1550 nm
Product Overview
This optical switch supports 1×2 and 2×2 port configurations for optical path switching and redundancy protection at 1310 nm and 1550 nm. Its low-loss design and high channel isolation ensure stable signal paths, making it ideal for routing and failover in optical communication links, fiber sensing systems, and laboratory test platforms.
Key Features
- Low insertion loss: typical ≤0.8 dB, conserving link power budget
- High channel isolation: ≥55 dB, preventing leakage between adjacent channels
- Fast switching: ≤10 ms, suitable for protection switching
- Consistent repeatability: ≤0.02 dB, stable performance over long-term use
- Long lifespan: ≥10^7 switching cycles
- Flexible customization: Pigtail type, length, and connectors configured to meet system requirements
Applications
- Channel switching and redundancy protection for optical communication links
- Multi-channel signal selection in fiber sensing systems
- Optical path switching in LiDAR and test platforms
Selection Guide
Available in 1×2 and 2×2 configurations at 1310/1550 nm, with a maximum optical power of 500 mW. Contact our technical team for other channel counts or polarization-maintaining versions.
Specifications
1×2 Optical Switch
| Parameter | Value |
|---|---|
| Port Settings | 1×2 |
| Wavelength | 1310/1550 nm |
| Insertion Loss | ≤0.8 dB |
| Crosstalk | ≥55 dB |
| Switching Time | ≤10 ms |
| Repeatability | ≤0.02 dB |
| Durability | ≥10^7 times |
| Maximum Optical Power | 500 mW |
| Fiber Type | Single-mode or PM available |
| Operating Temperature | -5~+70 ℃ |
| Connector Type | FC/UPC, FC/APC, LC/UPC |
2×2 Optical Switch
| Parameter | Value |
|---|---|
| Port Settings | 2×2 |
| Wavelength | 1310/1550 nm |
| Insertion Loss | ≤1.0 dB |
| Crosstalk | ≥55 dB |
| Switching Time | ≤10 ms |
| Repeatability | ≤0.02 dB |
| Durability | ≥10^7 times |
| Maximum Optical Power | 500 mW |
| Fiber Type | Single-mode or PM available |
| Operating Temperature | -5~+70 ℃ |
| Connector Type | FC/UPC, FC/APC, LC/UPC |